涂覆(涂层)检测AOI设备,台式涂覆机,三防漆桌面涂覆机,台式点胶机,三防漆喷涂机,三防漆喷胶机,桌面点胶机 涂覆(涂层)检测AOI设备,台式涂覆机,三防漆桌面涂覆机,台式点胶机,三防漆喷涂机,三防漆喷胶机,桌面点胶机

示例图片三
网站首页 > 新闻资讯 > 业界资讯

常见的自动点胶机行程速度是多少

2018-04-04 10:37:43 【东智精密】   来源: xiexuhui     阅读

随着科技的发展,自动点胶机发展成为灵活性强、能适应许多产品的生产的设备,并且克服了之前点胶机的许多缺陷,包括采购成本高、不容易安装、维修费用高、设备庞大结构复杂、操作繁琐等问题。
With the development of science and technology, automatic dispensing machine become flexible, can adapt to the production of many products, and overcome many defects before dispensing, including the procurement of high cost, not easy installation, high maintenance cost, large equipment with complex structure, complicated operation etc.

双头双工位热熔胶PUR点胶机

自动点胶机的不断优化可以给企业带来更多的利益和好处,是企业改进生产工艺,提高生产效率最理想的选择。目前,全自动点胶机在食品、日化、医药等领域扮演着重要角色,但是作为企业采购方,采购点胶机之前肯定要对设备的基本参数有个大致的了解,今天我们就来说一说常见的自动点胶机行程速度是多少?
The continuous optimization of the automatic glue dispenser can bring more benefits and benefits to the enterprise. It is the most ideal choice for the enterprise to improve the production process and improve the production efficiency. At present, automatic dispensing machine plays an important role in the food, cosmetic, medicine and other fields, but as the enterprise procurement, procurement before dispensing machine must be basic parameters of the equipment have a broad understanding, what is today we say common automatic dispensing machine travel speed?

很多点胶机说明书上标注的机器空载状态下,最快可走400MM/S,不同厂家可能有出入,但是这毕竟是理论值,现实作业中有可能达不到这个值,这一点作为采购方希望你们知道,不要被某些业务员忽悠了,因为真正在使用时,我们要考虑产品工艺,胶水类型,点胶路径等...所以综合起来,实际上自动点胶机在投产使用时,行程速度大多数在80MM/S到100MM/S之间。
A lot of instructions on the label dispensing machine under no-load condition, the fastest 400MM/S, different manufacturers may differ, but this is the theoretical value, this value may be the reality of the job is not up to this point as the purchaser, want you to know, don't be fooled some salesman, because the real in use when we consider the product process, the type of glue dispensing path, etc.... So together, actually put into use in automatic dispensing machine, speed of most of the 80MM/S to 100MM/S.

当胶水粘度低,点胶路径简单相对来说快一些,胶水粘度高,点胶路径复杂相对的来说应该调的慢一些。胶水粘度低,调的太慢,会出胶过多,胶水粘度高,跳太快,出胶更不上,产品就会出现点胶不均匀的情况。
When the viscosity of the glue is low, the path of the glue is simpler and faster, the viscosity of the glue is high, and the path of the glue should be more slowly. The viscosity of the glue is low, the adjustment is too slow, the glue is too much, the viscosity of the glue is high, the jump too fast, the glue is not up, the product will appear the uneven glue.



标签:   点胶机
Powered by 天使猫信息科技 ©2008-2020 www.tzmsmt.com 粤ICP备18017075号-1